Most of the parts are printed with only one perimeter/shell thickness (0.4 mm nozzle gives the best results). Please experiment with temperature (for PLA in range 210-260) for proper layer bonding… Usually, for thin wall printing, we need higher temperatures than recommended by filament manufacturers compared to printing standard items. Included Gcodes are 100% compatible with Prusa i3 original printers (it should work with most i3 family and compatible printers as well) Please check our Facebook or Forum for recent information. Older Slic3r based or other slicers are not supported and the functionality is not guaranteed. Satisfactory results are achieved with Cura, please check the Help section for more info about slicing in specific slicers. Since version 2.4.0 we also support Prusa Slicer and continuously add preconfigured 3mf files to the downloads. We’re including Simplif圓D factory files with all settings preconfigured for Direct drive printers. Our STL files are designed for printing in special mode, which some slicers may detect as faulty. This is intentional result of extensive development to achieve desired strength to weight ratio. We’re using some specific features in our STL files resulting in possible errors in some CAD / slicing software. Please see the PDF/VIDEO user guide prior to printing our models. Our Forum contains many useful informations as well. We’re using the same technology for all of our models, so once you dial in your printer for any of the test files, you should be able to print all of them. You’ll find usually the largest part of some of our planes. If you want to test your printer before buying the plane, you can find the test files on our Thingiverse profile.
RC equipment (links provided in our airplane userguide).PolyAir 1.0 (highly recommended) or PLA filament.
0 kommentar(er)
